Magazine hangs out wall mounted - Dot

A beautiful magazine hangs out made of a thin steel cable sliding vertically down form a cover wall mounted. Perfect also for small spaces: the magazine hang out needs just a little space to be installed and it is vertical. The cable can be customized, with different lengths. The magazine is fixed at the base with a stopper and a rounded plate made of brass, in order to avoid the fall of the magazine.

It is fixed to the wall with a brass cover that hides the fixation system. From the cover, the steel cable falls down, vertically.

The cover for wall fixation is included. It is included one clamp with a screw.

Characteristics

Materials :

• Clamps in turned brass, chrome plated.
• Locking screws in stainless steel.
• Wire in inox aisi 316 Ø 1,5 mm 7×7 stainless steel.
• Washer at the base: painted / chrome plated/ brushed nickel brass, depending on the version.

Certifications : TUV certification system UNI EN ISO 9001: 2008.

Fixing :

• Fix the product to a cover of the DOT series (not supplied) by the clamp supplied. Fix the cover to the wall by plugs and screws not included in the package.
• Choose the appropriate type of plug according to the wall in which it will be fixed. Adequately tighten the screws in the chrome plated clamps.

Maintenance

• Make a proper cleaning with water and soap. Do not use aggressive, abrasive, corrosive products; acids, acetone, diluent, etc
• Do not scratch the surface. ( Painted, or chrome-plated or nickel brushed ).
• Check periodically the correct fixation of the system and its solidity.
• Do not use it for different purposes.